PL 4mm tube to M5

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The PL 4mm tube to M5 fitting is designed to connect 4mm airline tubing to M5 metric threaded components. This allows for a secure and leak-free connection in air suspension systems.

Yes, the PL 4mm tube to M5 fitting is suitable for high-pressure applications within the limits of the airline and air suspension system. Always ensure that the entire system is rated for the required pressure.

The PL 4mm tube to M5 fitting is typically made from durable plastic or brass, ensuring longevity and resistance to corrosion. This makes it suitable for various environmental conditions.

This fitting is commonly used in air suspension systems for connecting airlines to valves, compressors, and airbags. It is ideal for applications requiring a compact and reliable connection.