• PE1/4-1/8NPT T PIECE FEMALE - Boss Air Suspension
1 1

Boss Air Suspension

PE1/4-1/8NPT T PIECE FEMALE

PE1/4-1/8NPT T PIECE FEMALE

FIT-PEF1/4-N1M T

$9.45 AUD
$9.45 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

50 in stock

The PE1/4-1/8NPT T Piece Female is a tee fitting for creating a branch connection while adapting 1/4 airline to a 1/8 NPT female threaded connection.

  • 1/4 tube to 1/8 NPT female tee fitting
  • Push-fit airline connection
  • Useful for branching air system plumbing
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the PE1/4-1/8NPT T Piece Female? ⌄

The PE1/4-1/8NPT T Piece Female is designed to connect multiple air lines in your air suspension system. It allows for efficient distribution of air to airbags, ensuring optimal performance and stability in load assist applications.

What size air lines does the PE1/4-1/8NPT T Piece Female accommodate? ⌄

This fitting is specifically designed for 1/4 inch air lines and connects to 1/8 NPT threads. This makes it compatible with a variety of air suspension setups, ensuring versatility in installation.

Can the PE1/4-1/8NPT T Piece Female be used with other brands? ⌄

While the PE1/4-1/8NPT T Piece Female is designed for Boss Air Suspension systems, it can be used with other brands that have compatible 1/4 inch air lines and 1/8 NPT fittings. Always ensure compatibility before installation.

What materials are used in the construction of the PE1/4-1/8NPT T Piece Female? ⌄

This fitting is constructed from high-quality materials to ensure durability and resistance to wear and tear. Its robust design helps maintain a reliable air seal, which is crucial for the performance of your air suspension system.

Is any special installation procedure required for the PE1/4-1/8NPT T Piece Female? ⌄

Standard installation procedures apply. It is recommended to use a liquid thread sealant on the threaded connections to prevent leaks. Ensure that all fittings are tightened securely, and check for leaks after installation.

What are the typical applications for the PE1/4-1/8NPT T Piece Female? ⌄

The PE1/4-1/8NPT T Piece Female is commonly used in load assist kits for vehicles, trailers, and caravans. It helps in managing air distribution effectively, enhancing stability and load management during towing or carrying heavy loads.