1/4 Tube x 1/8 NPT Female Fitting

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The PCF1/4-N1UT FEMALE fitting is designed to connect a 1/4" airline to a 1/8" NPT female thread. This allows for easy integration into air suspension systems, ensuring a secure and leak-free connection.

This fitting is typically made from durable brass, which provides excellent resistance to corrosion and ensures a long service life in various environments.

Yes, the PCF1/4-N1UT FEMALE fitting is compatible with most air suspension systems that utilise 1/4" airline and 1/8" NPT threads. However, always verify compatibility with your specific system before installation.

The PCF1/4-N1UT FEMALE fitting is rated for high-pressure applications, typically up to 150 PSI. Always consult the manufacturer's specifications for your specific setup to ensure safe operation.

To install the PCF1/4-N1UT FEMALE fitting, apply a suitable liquid thread sealant to the threads before screwing it into the 1/8" NPT port. Ensure a tight fit without overtightening, which could damage the fitting.

The PCF1/4-N1UT FEMALE fitting is commonly used in air suspension systems, air tools, and pneumatic applications where a reliable connection between airlines and threaded ports is required.