• P6 5/16X1/8BRMALE ELBOW - Boss Air Suspension
1 1

Boss Air Suspension

P6 5/16X1/8BRMALE ELBOW

P6 5/16X1/8BRMALE ELBOW

FIT-P6-5/6X1/8ELB

$14.35 AUD
$14.35 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

Low stock: 3 left

The P6 5/16 x 1/8 BR Male Elbow is an air fitting used for LandCruiser diff breather plumbing where a 5/16 to 1/8 male elbow connection is required.

  • 5/16 x 1/8 BR male elbow fitting
  • Designed for LandCruiser diff breather applications
  • Useful for compact breather hose routing
  • Suitable for compatible diff breather systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the primary use of the P6 5/16X1/8BRMALE ELBOW? ⌄

The P6 5/16X1/8BRMALE ELBOW is designed specifically for Landcruiser diff breathers, ensuring optimal airflow and connectivity within the air suspension system. It plays a crucial role in maintaining the efficiency of the vehicle's air management.

What is the installation process for the P6 5/16X1/8BRMALE ELBOW? ⌄

Installation of the P6 5/16X1/8BRMALE ELBOW involves connecting it to the diff breather line, ensuring a secure fit. It is recommended to use a liquid thread sealant to prevent leaks, as thread tape can fragment and cause issues.

Can the P6 5/16X1/8BRMALE ELBOW be used in high-pressure applications? ⌄

Yes, the P6 5/16X1/8BRMALE ELBOW is designed to withstand the pressures typically found in air suspension systems. However, always ensure that it is used within the specified limits to maintain optimal performance and safety.