Nitto Male Plug for Airline

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The NITTO Male PLUG for Airline is designed to connect air lines within your air suspension system. It ensures a secure and leak-free connection, which is crucial for maintaining optimal air pressure in your airbags.

This fitting is specifically designed to work with Boss Air Suspension systems. While it may fit other systems that use NITTO-style connections, always verify compatibility to ensure proper performance.

While the NITTO Male PLUG is primarily designed for air suspension systems, it can also be used in other pneumatic applications that require a secure air line connection. Always ensure the application is suitable for the fitting's specifications.

To install the NITTO Male PLUG, ensure that the air line is cut squarely and fully insert it into the fitting. Use a liquid thread sealant on threaded connections to prevent leaks. Avoid using thread tape, as it can fragment and cause blockages.

The NITTO Male PLUG is designed to handle the pressures typically found in air suspension systems. Always refer to the product specifications for the exact maximum working pressure to ensure safe operation.

The NITTO Male PLUG offers a reliable, secure connection that is less prone to leaks compared to other fittings. Its design allows for easy connection and disconnection, making it ideal for systems that require frequent adjustments.