• INLINE CHECK VALVE (1/4 Push Fit) - Boss Air Suspension
1 1

Boss Air Suspension

INLINE CHECK VALVE (1/4 Push Fit)

INLINE CHECK VALVE (1/4 Push Fit)

VLV-INLINE-Check-1/4

$13.75 AUD
$13.75 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

93 in stock

This inline check valve is a one-way valve for 1/4 inch push-fit airline. It allows air to flow in one direction and helps stop backflow in air suspension, tank and accessory plumbing.

  • 1/4 inch push-fit airline connections
  • Inline one-way check valve design
  • Helps prevent reverse air flow
  • Suitable for air suspension, onboard air and accessory lines

Install with flow direction correct for your circuit. Cut airline square with a proper tube cutter and fully seat the tube in each push-fit end. Contact Boss Air Suspension if you need help choosing fittings for your setup.

View full details

Frequently asked questions

What can cause an air valve or valve block to stick? ⌄

Valves and valve blocks can stick due to contamination such as thread tape fragments, rust particles from non-aluminium tanks, moisture, or degraded seals. Using liquid thread sealant, draining the tank regularly and filtering the air supply all help prevent sticking issues.

How should valves be mounted in an air suspension system? ⌄

Mount valves or valve blocks where they are protected from water, road debris and direct exhaust heat. Ensure they are accessible for service and that airlines are routed with smooth bends, avoiding kinks or rubbing points.

What is the purpose of the INLINE CHECK VALVE (1/4 Push Fit)? ⌄

The INLINE CHECK VALVE (1/4 Push Fit) is designed to prevent backflow in air systems. This ensures that air can only flow in one direction, maintaining pressure in the airbags and preventing any loss of air when the system is not in use.

How do I install the INLINE CHECK VALVE (1/4 Push Fit)? ⌄

Installation of the INLINE CHECK VALVE is straightforward. Simply cut the airline at the desired location, ensuring a square cut, and push the ends of the airline into the push-fit connectors of the valve. Ensure the valve is oriented correctly to allow for proper airflow.

Can I use the INLINE CHECK VALVE with any airbag system? ⌄

Yes, the INLINE CHECK VALVE (1/4 Push Fit) is compatible with most airbag systems that utilise 1/4" push-fit airlines. It is particularly effective in maintaining pressure in Boss Air Suspension setups.

What are the benefits of using a push-fit design for this valve? ⌄

The push-fit design allows for quick and easy installation without the need for additional tools or fittings. This design also ensures a secure connection, reducing the risk of air leaks compared to threaded fittings.

Is the INLINE CHECK VALVE suitable for high-pressure applications? ⌄

Yes, the INLINE CHECK VALVE is designed to withstand typical pressures found in air suspension systems. However, always ensure that it is used within the manufacturer's specified pressure limits to avoid potential failure.

How does the INLINE CHECK VALVE differ from other types of valves? ⌄

The INLINE CHECK VALVE specifically allows airflow in one direction while preventing backflow, unlike standard valves that may not have this feature. This is crucial for maintaining consistent air pressure in air suspension systems.

What maintenance is required for the INLINE CHECK VALVE? ⌄

Minimal maintenance is required for the INLINE CHECK VALVE. However, it is advisable to periodically check for any signs of wear or leaks and ensure that the airline connections remain secure to maintain optimal performance.