• FIT-PE1/4T PIECE - Boss Air Suspension
1 1

Boss Air Suspension

FIT-PE1/4T PIECE

FIT-PE1/4T PIECE

FIT-PE1/4T

$17.95 AUD
$17.95 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

269 in stock

The FIT-PE1/4T Piece is a 1/4 push-fit tee fitting for creating a three-way branch in 1/4 airline. It is suited to air suspension and onboard air plumbing layouts where a compact branch connection is needed.

  • 1/4 x 1/4 x 1/4 female tee configuration
  • Push-fit airline connections
  • Useful for branching 1/4 airline runs
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the FIT-PE1/4T PIECE? ⌄

The FIT-PE1/4T PIECE is designed to provide a robust connection in air suspension systems. Its 1/4 X 1/4 X 1/4 Female T configuration allows for seamless integration, making it ideal for enhancing load assist capabilities or upgrading air suspension setups.

What materials are used in the FIT-PE1/4T PIECE? ⌄

This fitting is constructed from high-quality materials that ensure durability and resistance to wear. The precision engineering by Boss Air Suspension guarantees a reliable connection that can withstand the demands of air suspension systems.

Can the FIT-PE1/4T PIECE be used with all Boss airbags? ⌄

Yes, the FIT-PE1/4T PIECE is compatible with all Boss airbags, making it a versatile choice for various air suspension configurations. It is particularly useful in load assist kits where reliable fittings are essential for optimal performance.

How does the FIT-PE1/4T PIECE differ from other air fittings? ⌄

The FIT-PE1/4T PIECE features a unique T configuration that allows for multiple connections in a compact design. Unlike standard fittings, this piece provides enhanced versatility and ease of installation in tight spaces, making it a preferred choice for complex air suspension setups.

Is any special installation procedure required for the FIT-PE1/4T PIECE? ⌄

While the FIT-PE1/4T PIECE is designed for easy installation, it is recommended to use a liquid thread sealant on threaded fittings to prevent leaks. Ensure that all connections are tight and secure to maintain optimal performance in your air suspension system.