FIT-PC1/4-N3UT

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The FIT-PC1/4-N3UT is a 1/4" airline push fitting that connects to a 3/8" NPT male thread. It is designed to create a secure and reliable connection in air suspension systems, ensuring efficient air flow to your airbags.

This fitting is typically constructed from durable materials such as brass or high-quality plastic, ensuring longevity and resistance to corrosion. This makes it suitable for use in various air suspension applications.

Yes, the FIT-PC1/4-N3UT can be used with other fittings that have compatible thread sizes. However, ensure that the fittings are rated for the same pressure and application to maintain system integrity.

The FIT-PC1/4-N3UT fitting is designed to handle typical pressures found in air suspension systems, generally up to 150 PSI. Always check the specifications of your system to ensure compatibility.

While the FIT-PC1/4-N3UT fitting is robust, it is essential to consider the temperature limits of the materials used. For high-temperature applications, verify the manufacturer's specifications to ensure safe operation.

To install the FIT-PC1/4-N3UT fitting, simply push the 1/4" airline into the fitting until it is fully seated. Ensure the 3/8" NPT male thread is securely connected to the corresponding female thread. Always check for leaks after installation.