FIT-PC1/2-N4UT

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The FIT-PC1/2-N4UT air fitting is designed to provide a secure connection between your air suspension system and air supply lines. With a 1/2 tube to 1/4 NPT configuration, it ensures optimal airflow and pressure management for your load assist setup.

Yes, the FIT-PC1/2-N4UT is compatible with all Boss air suspension systems that utilise a 1/2 inch tube connection. It is specifically designed to integrate seamlessly with Boss components for reliable performance.

The FIT-PC1/2-N4UT is crafted from high-quality materials to ensure durability and resistance to wear. This construction is essential for maintaining a secure and leak-free connection in demanding air suspension applications.

While the FIT-PC1/2-N4UT is primarily designed for air suspension systems, it can also be used in other pneumatic applications that require a 1/2 inch tube to 1/4 NPT connection. Always ensure compatibility with your specific system before use.

The FIT-PC1/2-N4UT is typically used in load assist kits to connect air supply lines to airbags. It is ideal for enhancing vehicle stability when towing or carrying heavy loads, ensuring that the air suspension system operates effectively.

The FIT-PC1/2-N4UT features a specific 1/2 inch tube to 1/4 NPT configuration, which may differ from other fittings that use different sizes or thread types. This design ensures a secure fit for Boss air suspension systems, optimising performance and reliability.