Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The FIT-BANJO Twin-1/4 NPT Thread is designed to connect air lines in your air suspension system, specifically for load assist applications. Its twin banjo design allows for efficient air distribution to airbags, enhancing stability and performance when towing or carrying heavy loads.

Yes, the FIT-BANJO Twin-1/4 NPT Thread is designed to withstand high pressures typical in air suspension systems. However, it is essential to ensure that all components in your system are rated for the same pressure to maintain safety and performance.

The FIT-BANJO features a unique twin design that allows for dual air supply to airbags, which is not available in standard single fittings. This design helps to maintain balanced air pressure across both airbags, reducing the risk of body roll and enhancing vehicle stability.

Yes, installation of the FIT-BANJO is straightforward for both professional installers and DIY enthusiasts. It requires basic tools and knowledge of air suspension systems. Ensure that the threads are sealed properly to prevent leaks, and follow the manufacturer's guidelines for optimal results.

Regularly inspect the FIT-BANJO for any signs of wear or damage. Ensure that all connections are tight and free from leaks. It is also advisable to periodically check and clean the air lines to prevent contamination that could affect performance.