FIT-1/4-1/4NPT-T Male

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The FIT-1/4-1/4NPT-T Male fitting features a 1/4 inch NPT thread size on both ends, making it compatible with standard air suspension systems and fittings.

This fitting is ideal for use in air suspension setups, particularly in Load Assist kits. It is designed to provide secure connections for airbags, enhancing the load-carrying capacity and stability of your vehicle.

The FIT-1/4-1/4NPT-T Male fitting is crafted with precision and robust materials, ensuring a reliable connection that can withstand heavy-duty applications. Unlike some generic fittings, it is specifically designed for optimal performance in air suspension systems.

Yes, the FIT-1/4-1/4NPT-T Male fitting is compatible with various air suspension systems that utilise 1/4 inch NPT threads. However, always ensure that the fitting meets the specific requirements of your system for optimal performance.

When installing the FIT-1/4-1/4NPT-T Male fitting, it is recommended to use a liquid thread sealant to ensure a leak-free connection. Ensure that the threads are clean and that the fitting is tightened securely without over-torquing.

The FIT-1/4-1/4NPT-T Male fitting is designed to handle the pressures typically found in air suspension systems. For specific pressure ratings, please refer to the technical specifications provided by Boss Air Suspension.