Cone Silencer | 1/8 NPT

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The CONE SILENCER 1/8 is designed to reduce noise in your air suspension system, ensuring smoother operation and enhancing overall performance. It helps to minimise air turbulence, which can lead to a quieter ride and improved efficiency.

Yes, the CONE SILENCER 1/8 can be used with any air compressor that has 1/8-inch fittings. It is particularly beneficial when used in conjunction with Boss compressors to optimise air flow and reduce noise.

The CONE SILENCER 1/8 is ideal for use in load assist kits, trailers, and any air suspension systems where noise reduction and smooth operation are desired. It is especially useful in applications where air suspension is frequently adjusted.

Unlike standard fittings, the CONE SILENCER 1/8 is specifically designed to minimise noise and turbulence in the air line. This unique design enhances the performance of your air suspension system, providing a more stable and quieter ride.