• CONE SILENCER 1/4 - Boss Air Suspension
1 1

Boss Air Suspension

Cone Silencer | 1/4 NPT

Cone Silencer | 1/4 NPT

COM-CONE-SIL1/4

$14.35 AUD
$14.35 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

238 in stock

This 1/4 NPT Cone Silencer is used on air suspension and onboard air systems to help reduce exhaust noise at a threaded air outlet.

  • 1/4 NPT cone silencer
  • Threaded air exhaust silencer
  • Useful for valve and air system outlets
  • Sold as a single fitting
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the CONE SILENCER 1/4? ⌄

The CONE SILENCER 1/4 is designed to reduce noise in air suspension systems, providing a quieter operation. It helps to minimise the sound generated by air flow, enhancing the overall driving experience.

How does the CONE SILENCER 1/4 fit into my existing air suspension setup? ⌄

The CONE SILENCER 1/4 is compatible with standard 1/4" air fittings, making it easy to integrate into your current air suspension system. Simply replace your existing fitting with the silencer for improved performance.

Can the CONE SILENCER 1/4 be used with any Boss airbag or compressor? ⌄

Yes, the CONE SILENCER 1/4 is designed to work seamlessly with Boss airbags and compressors that utilise 1/4" fittings. It is a versatile addition that enhances the functionality of your air suspension system.

What are the typical use cases for the CONE SILENCER 1/4? ⌄

The CONE SILENCER 1/4 is ideal for use in Load Assist kits, where noise reduction is desired during operation. It is particularly beneficial in applications where air suspension systems are frequently adjusted, such as towing or off-road driving.

How does the CONE SILENCER 1/4 differ from other air fittings? ⌄

Unlike standard fittings, the CONE SILENCER 1/4 incorporates a design specifically aimed at reducing noise. This focus on sound attenuation sets it apart from typical fittings that do not address noise issues in air suspension systems.

Is the CONE SILENCER 1/4 suitable for high-pressure applications? ⌄

Yes, the CONE SILENCER 1/4 is designed to withstand high pressures typical in air suspension systems. It is built with durability in mind, ensuring reliable performance under varying conditions.