BULKHEAD FITTING 1/4 FEMALE

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The BULKHEAD FITTING 1/4 FEMALE is designed to provide a secure connection point for air lines through a panel or bulkhead. It allows for a clean and professional installation, ensuring that air lines can be routed without kinks or stress on the fittings.

This fitting features 1/4" NPT threads on both sides, which is a standard size for many air suspension and pneumatic applications. This ensures compatibility with a wide range of air lines and components.

Yes, the BULKHEAD FITTING 1/4 FEMALE is suitable for high-pressure applications commonly found in air suspension systems. Ensure that it is properly sealed and installed to prevent leaks under pressure.

This fitting is specifically designed with 1/4" NPT threads, making it ideal for air suspension systems. Unlike some other fittings that may use different thread sizes or types, this fitting ensures compatibility with standard air lines and components, simplifying installation.

The BULKHEAD FITTING 1/4 FEMALE is made from durable metal, ensuring longevity and resistance to wear and tear. This construction is essential for maintaining a reliable air-tight seal in your air suspension system.