Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The Adjustable Muffler 1/8 is designed to optimise airflow within your air suspension system. It allows for fine-tuning of air pressure, ensuring smooth operation and improved performance of your Load Assist kits.

Unlike standard mufflers, the Adjustable Muffler 1/8 features a design that allows for adjustable airflow, providing greater control over the air suspension system. This flexibility helps in achieving the desired ride height and comfort level.

To install the Adjustable Muffler 1/8, ensure all fittings are clean and use a liquid thread sealant for a secure connection. Attach the muffler to the air line, ensuring it is positioned to allow for easy adjustment and access.

Regularly check the Adjustable Muffler 1/8 for any signs of wear or damage. Ensure that the adjustment mechanism is functioning smoothly and that all connections are secure. Periodic cleaning of the fittings can help maintain optimal performance.