ADJUSTABLE MUFFLER 1/4

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The Adjustable Muffler 1/4 is designed to optimise airflow within your air suspension system. It helps to reduce noise and improve the efficiency of air distribution, ensuring that your airbags operate smoothly and effectively under varying load conditions.

This muffler is specifically engineered to work seamlessly with Boss Load Assist kits. It enhances the performance of the air system by allowing for adjustable airflow, which is crucial for maintaining optimal pressure in the airbags, especially when towing or carrying heavy loads.

The Adjustable Muffler 1/4 stands out due to its adjustable airflow feature, which allows for fine-tuning based on your specific needs. Unlike standard mufflers, this product provides greater control over air distribution, making it a preferred choice for those who require enhanced performance from their air suspension systems.