• 50amp Onboard Air Wiring loom - Boss Air Suspension
  • 50amp Onboard Air Wiring loom - Boss Air Suspension
1 2

Boss Air Suspension

50amp Onboard Air Wiring loom

50amp Onboard Air Wiring loom

COM-PX50A-LOOM

$169.00 AUD
$0.00 AUD $169.00 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

Low stock: 10 left

Professionally Assembled, Australian manufactured loom suitable for our PX07 12 Volt Air Compressors and Onboard Air Kits.
Most of the wire ends are terminated with spade/plug or ring fitting for quick fitment.

  • Ideal for our PX07 compressors
  • 6mtr Cable length suitable for most Vehicles, 4x4s & 12v Trucks
  • 1.5 mtr Cable length into cab for remote on/off switch
  • Waterproof Fuse Holder with 3amp fuse (low current)
  • Waterproof Fuse Holder with 50amp fuse (heavy current)
  • Easy DIY plug & play setup
  • Australian manufactured

 

View full details

Frequently asked questions

Which Boss compressor is best for Load Assist kits? ⌄

For Load Assist kits where you are only inflating airbags, a compact compressor like the Boss PX01 is usually ideal. It is sized to adjust bag pressure without the need for a large tank and is simple to install.

What if I want to inflate tyres or run air tools as well? ⌄

If you want to inflate tyres or use air for other purposes, you will need an air tank and a larger compressor with a longer duty cycle, such as the PX06 or the heavy-duty PX07. These compressors can deliver more air for longer periods without overheating.

Do I need a tank with my compressor? ⌄

For basic Load Assist airbag adjustment only, you can run a suitable compressor with or without a small tank. For ride-levelling systems, full air suspension, or frequent tyre inflation, a tank is strongly recommended so the compressor is not cycling constantly.

How should I mount a Boss compressor? ⌄

Mount the compressor on a solid surface, away from excessive heat, water splash and debris. Provide adequate ventilation around the motor and use the supplied vibration isolators. Follow the wiring instructions carefully and use the correct fuse and relay as specified.

What vehicles is the 50amp Onboard Air Wiring Loom compatible with? ⌄

The 50amp Onboard Air Wiring Loom is designed to be compatible with most vehicles, including 4x4s and 12V trucks. Its 6m cable length provides ample reach for installation in various configurations.

Can I use this wiring loom with compressors other than the PX07? ⌄

This wiring loom is specifically designed for use with the PX07 12 Volt Air Compressor and Onboard Air Kits. While it may work with other compressors, optimal performance and fitment cannot be guaranteed.

What is the purpose of the waterproof fuse holders included in the loom? ⌄

The waterproof fuse holders protect the electrical connections from moisture, ensuring reliable operation. The 3amp fuse is for low current applications, while the 50amp fuse is designed for heavy current, providing safety and preventing overload.

Is the 1.5m cable length into the cab sufficient for remote operation? ⌄

Yes, the 1.5m cable length into the cab is designed to provide enough reach for a remote on/off switch, allowing for convenient operation from inside the vehicle.

What makes this wiring loom different from other options on the market? ⌄

This wiring loom is professionally assembled and Australian manufactured, ensuring high quality and reliability. Its specific design for the PX07 compressor, along with the included waterproof fuse holders, sets it apart from generic wiring options.