5 Foot Cord Drain Valve

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 5 Foot Cord Drain Valve is designed to facilitate easy drainage of moisture from your air suspension system. Regular drainage is essential for maintaining the efficiency and longevity of your air fittings and airbags.

The 5 Foot Cord Drain Valve is ideal for users who frequently operate their air suspension systems in varying conditions, such as off-road environments or wet conditions. It allows for quick maintenance and helps prevent moisture-related issues.

The 5 Foot Cord Drain Valve features a longer cord for easier access, allowing you to drain moisture without needing to reach under the vehicle. This is particularly beneficial for larger vehicles or those with limited access points.

To maintain the 5 Foot Cord Drain Valve, ensure it is regularly checked for any signs of wear or damage. Periodically test the valve to confirm it opens and closes properly, and keep the cord free from obstructions for optimal operation.

Yes, the 5 Foot Cord Drain Valve can be installed by someone with basic mechanical skills. Ensure you follow the installation instructions carefully, and use appropriate tools to avoid damaging the valve or your air suspension system.