• 4MM Tube -1/8 FEMALE PUSH FITTING - Boss Air Suspension
  • 4MM Tube -1/8 FEMALE PUSH FITTING - Boss Air Suspension
1 2

Boss Air Suspension

4MM Tube -1/8 FEMALE PUSH FITTING

4MM Tube -1/8 FEMALE PUSH FITTING

FIT-PCF4-1/8

$11.85 AUD
$11.85 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

22 in stock

The 4 mm Tube to 1/8 Female Push Fitting connects 4 mm airline to a 1/8 female threaded connection in air suspension and onboard air plumbing. It is useful where a small push-fit airline connection needs to adapt to a threaded component.

  • 4 mm tube push fitting
  • 1/8 female threaded connection
  • Useful for adapting 4 mm airline to threaded air components
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 4MM Tube -1/8 FEMALE PUSH FITTING? ⌄

The 4MM Tube -1/8 FEMALE PUSH FITTING is designed to create a secure and reliable connection in your air suspension system. It is particularly useful for connecting air lines to airbags in Load Assist kits, ensuring optimal performance and functionality.

How do I install the 4MM Tube -1/8 FEMALE PUSH FITTING? ⌄

Installation is straightforward due to the push fitting design. Simply cut the air tube squarely, insert it into the fitting until it is fully seated, and ensure there are no leaks. Always check the connection after installation to confirm it is secure.

Is this fitting compatible with other brands of air suspension systems? ⌄

The 4MM Tube -1/8 FEMALE PUSH FITTING is designed to work seamlessly with Boss Air Suspension products. While it may fit other systems that use 4mm tubing, it is recommended to use Boss fittings for optimal performance and reliability.

What is the maximum pressure rating for this fitting? ⌄

This fitting is designed to handle typical pressures found in air suspension systems. Always refer to the specific pressure ratings provided by Boss to ensure safe operation within the limits of your system.

Can I use this fitting for other applications outside of air suspension? ⌄

While the 4MM Tube -1/8 FEMALE PUSH FITTING is primarily designed for air suspension systems, it may be used in other pneumatic applications that require a secure connection with 4mm tubing. Ensure compatibility with your specific application before use.

What maintenance is required for this fitting? ⌄

Minimal maintenance is required for the 4MM Tube -1/8 FEMALE PUSH FITTING. Regularly check for leaks and ensure that the fitting remains securely connected. If any signs of wear or damage are present, replace the fitting to maintain system integrity.