• 3/8TUBE X 3/8NPT FEMALE - Boss Air Suspension
1 1

Boss Air Suspension

3/8 Tube x 3/8 NPT Female Fitting

3/8 Tube x 3/8 NPT Female Fitting

FIT-PCF3/8-N3UT

$14.35 AUD
$14.35 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

41 in stock

This 3/8 Tube x 3/8 NPT Female Fitting connects 3/8 push-fit airline to a 3/8 NPT female threaded connection for air suspension and onboard air plumbing.

  • 3/8 tube push-fit connection
  • 3/8 NPT female thread
  • Useful for adapting airline to threaded components
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 3/8 Tube x 3/8 NPT Female fitting? ⌄

The 3/8 Tube x 3/8 NPT Female fitting is designed to connect 3/8 inch push-fit air tubing to a 3/8 inch NPT threaded connection. This allows for easy integration into air suspension systems or other pneumatic applications.

Is this fitting suitable for high-pressure applications? ⌄

Yes, this fitting is suitable for high-pressure applications commonly found in air suspension systems. However, always ensure that the overall system pressure does not exceed the fitting's rated specifications.

Can I use this fitting with other brands of air tubing? ⌄

This fitting is designed for 3/8 inch push-fit tubing. While it may work with other brands, it is recommended to use Boss air tubing for optimal performance and compatibility.

What materials is this fitting made from? ⌄

The 3/8 Tube x 3/8 NPT Female fitting is typically made from durable brass or similar corrosion-resistant materials, ensuring longevity and reliability in air suspension systems.

How do I ensure a leak-free connection with this fitting? ⌄

To ensure a leak-free connection, use a liquid thread sealant on the NPT threads rather than thread tape, as tape can fragment and cause blockages. Additionally, ensure the tubing is cut square and fully inserted into the push-fit connection.

What are the typical applications for this fitting? ⌄

This fitting is commonly used in air suspension systems, air tools, and various pneumatic applications where a secure connection between tubing and threaded components is required.