• 3/8NPT FEMALE - JIC FEMALE - Boss Air Suspension
1 1

Boss Air Suspension

3/8 NPT Female to JIC Female Fitting

3/8 NPT Female to JIC Female Fitting

COM-ADAP-3/8FEM-JICF

$27.20 AUD
$27.20 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

Low stock: 7 left

This 3/8 NPT Female to JIC Female Fitting adapts between threaded air system components in air suspension and onboard air plumbing.

  • Adapter fitting
  • 3/8 NPT female connection
  • JIC female connection
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 3/8NPT FEMALE - JIC FEMALE fitting? ⌄

The 3/8NPT FEMALE - JIC FEMALE fitting is designed to connect various components within your air suspension system. It ensures a secure and leak-free connection, which is crucial for maintaining optimal performance and reliability in load assist applications.

What materials are used in the construction of this fitting? ⌄

This fitting is crafted from high-quality materials to ensure durability and resistance to wear. The robust construction is designed to withstand the pressures and demands of air suspension systems, making it suitable for heavy-duty applications.

What is the typical use case for the 3/8NPT FEMALE - JIC FEMALE fitting? ⌄

This fitting is typically used in air suspension setups where reliable connections are needed for air lines and components. It is ideal for load assist kits, helping to enhance vehicle stability and performance when towing or carrying heavy loads.

Can this fitting be used in high-pressure applications? ⌄

Yes, the 3/8NPT FEMALE - JIC FEMALE fitting is designed to handle high-pressure applications typical in air suspension systems. However, always ensure that the entire system is rated for the pressures you intend to use.

What thread sealant is recommended for use with this fitting? ⌄

Boss recommends using a liquid thread sealant on the 3/8NPT FEMALE - JIC FEMALE fitting rather than thread tape. Liquid sealants provide a more reliable seal and reduce the risk of fragments blocking air lines.

How does this fitting compare to other air fittings in the Boss range? ⌄

The 3/8NPT FEMALE - JIC FEMALE fitting is specifically designed for applications requiring a female NPT to JIC connection. It differs from other fittings in the Boss range by its thread type and intended use, making it essential for specific configurations in air suspension systems.