• 3/8 x 1/8 REDUCING BUSH - Boss Air Suspension
1 1

Boss Air Suspension

3/8 x 1/8 Reducing Bush

3/8 x 1/8 Reducing Bush

COM-24REDBUSH-3/8X1/8

$10.75 AUD
$10.75 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

17 in stock

The 3/8 x 1/8 Reducing Bush helps adapt different fitting sizes in air suspension and onboard air plumbing by stepping a 3/8 connection down to 1/8.

  • 3/8 x 1/8 reducing bush
  • Useful for adapting mismatched connection sizes
  • Suitable for air suspension and onboard air systems
  • Sold as a single fitting
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 3/8 x 1/8 Reducing Bush? ⌄

The 3/8 x 1/8 Reducing Bush is designed to connect components of different sizes within your air suspension system. It ensures a smooth and efficient flow of air, which is crucial for optimal performance and reliability.

What materials are used in the construction of the Reducing Bush? ⌄

This reducing bush is crafted from high-quality materials to ensure durability and resistance to wear. Its robust construction is essential for maintaining performance under varying load conditions.

Can the 3/8 x 1/8 Reducing Bush be used with any air suspension system? ⌄

While the 3/8 x 1/8 Reducing Bush is compatible with many air suspension systems, it is important to ensure that it matches the specific fittings and requirements of your setup. Always consult the system specifications before installation.

What are the typical applications for this reducing bush? ⌄

The 3/8 x 1/8 Reducing Bush is commonly used in load assist kits, where it helps connect different sized air fittings. It is ideal for enhancing vehicle stability and performance, particularly when towing or carrying heavy loads.

How does the 3/8 x 1/8 Reducing Bush differ from other fittings? ⌄

Unlike standard fittings, the 3/8 x 1/8 Reducing Bush specifically allows for a reduction in size, making it versatile for various applications. Its design ensures a secure connection and efficient air flow, which is critical for maintaining system performance.

Is there a recommended installation procedure for the Reducing Bush? ⌄

For optimal performance, it is recommended to use a liquid thread sealant on the threaded fittings during installation. Ensure that the fittings are cut square and fully inserted to prevent leaks. Regular checks for tightness and integrity are also advised.