• 3/8 x 1/4 REDUCING BUSH - Boss Air Suspension
1 1

Boss Air Suspension

3/8 x 1/4 REDUCING BUSH

3/8 x 1/4 REDUCING BUSH

COM-24REDBUSH-3/8x1/4

$10.75 AUD
$10.75 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

20 in stock

The 3/8 x 1/4 Reducing Bush adapts a 3/8 threaded connection down to 1/4 in air suspension and onboard air plumbing.

  • 3/8 x 1/4 reducing bush
  • Threaded adapter fitting
  • Useful for adapting between fitting sizes
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 3/8 x 1/4 Reducing Bush? ⌄

The 3/8 x 1/4 Reducing Bush is designed to create a secure connection between air lines of different diameters, specifically 3/8 inch and 1/4 inch. This allows for seamless integration within your air suspension system, ensuring optimal performance and reliability.

In what applications is the 3/8 x 1/4 Reducing Bush typically used? ⌄

This reducing bush is commonly used in load assist kits and airbag installations, where varying air line sizes are present. It provides the necessary adaptability to accommodate different components in your air suspension setup.

How does the 3/8 x 1/4 Reducing Bush differ from other reducing bushes? ⌄

The key difference lies in its specific size configuration of 3/8 inch to 1/4 inch, which is tailored for particular applications within air suspension systems. Other reducing bushes may have different size combinations, so it's crucial to select the right one for your needs.

What materials are used in the construction of the 3/8 x 1/4 Reducing Bush? ⌄

The 3/8 x 1/4 Reducing Bush is crafted from high-quality materials that ensure durability and longevity. This robust construction is designed to withstand the pressures and demands of air suspension systems, making it a reliable choice for both professional and DIY applications.

Can I use the 3/8 x 1/4 Reducing Bush in high-pressure applications? ⌄

Yes, the 3/8 x 1/4 Reducing Bush is engineered to handle the pressures typically found in air suspension systems. However, always ensure that it is used within the specified pressure limits of your overall system to maintain safety and performance.