Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 3/8 MFF TEE fitting is designed to connect one male air line to two female lines, allowing for efficient distribution of air in your suspension system. It is particularly useful in applications where you need to split air supply to multiple components, such as airbags in a load assist kit.

This fitting is commonly used in air suspension systems, including load assist kits and full air suspension setups. It is ideal for connecting airbags, valves, and compressors, ensuring a reliable air supply across the system.

Yes, the 3/8 MFF TEE is compatible with other 3/8 inch air fittings. However, ensure that the fittings you are using are designed for similar pressure ratings and applications to maintain system integrity.

Unlike standard straight connectors, the 3/8 MFF TEE offers a branching option, which allows for more complex air distribution setups. This can be particularly beneficial in systems requiring multiple air connections without compromising flow efficiency.

The 3/8 MFF TEE is constructed from high-quality materials designed to withstand the pressures of air suspension systems. Its robust design ensures durability and longevity, making it suitable for both on-road and off-road applications.

Yes, the 3/8 MFF TEE is rated for high-pressure applications, making it suitable for use in demanding environments. Always ensure that the pressure ratings of all connected components are compatible to prevent system failures.