3/8 MALE THREAD NITTO PLUG

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 3/8 Male Thread Nitto Plug features a 3/8 inch male thread, making it compatible with various air fittings and systems that utilise this standard size.

This plug is ideal for a range of applications including air suspension systems, air tools, and other pneumatic setups where a secure connection is essential. It is particularly useful in load assist kits where reliability is crucial.

The 3/8 Male Thread Nitto Plug is designed for superior durability and a secure fit compared to standard fittings. Its robust construction ensures it can withstand high pressures and frequent use, making it a preferred choice for both professional and DIY applications.

Yes, the 3/8 Male Thread Nitto Plug is compatible with many other brands that utilise a 3/8 inch male thread. However, it is recommended to ensure that the fittings are designed for similar pressure ratings to maintain system integrity.

The 3/8 Male Thread Nitto Plug is designed to handle high pressures typical in air suspension systems. For specific pressure ratings, please refer to the product specifications or consult with Boss Air Suspension for detailed information.

Installation of the 3/8 Male Thread Nitto Plug is straightforward. It is recommended to use a liquid thread sealant for a secure fit and to prevent leaks. Ensure that the threads are clean and properly aligned during installation.