• 25 ELBOW 3/8 MALE FEMALE - Boss Air Suspension
1 1

Boss Air Suspension

25 ELBOW 3/8 MALE FEMALE

25 ELBOW 3/8 MALE FEMALE

COM-25-ELBOW-3/8MF

$13.20 AUD
$0.00 AUD $13.20 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

18 in stock
25 ELBOW 3/8 MALE FEMALE - Boss Air Suspension

25 ELBOW 3/8 MALE FEMALE

Product Category: Air Fittings

Brand: Boss Air Suspension

Introducing the 25 ELBOW 3/8 MALE FEMALE, a premium component in the world of air fittings, brought to you by the renowned Boss Air Suspension. This product is designed to seamlessly integrate with your air suspension system, ensuring optimal performance and reliability.

Crafted with precision, the 25 ELBOW 3/8 MALE FEMALE is an essential piece for those looking to enhance their vehicle's load assist capabilities. When paired with airbags, these brackets form a crucial part of load assist kits, providing the support and stability needed for heavy-duty applications.

Whether you're upgrading your current setup or building a new system from scratch, trust in the quality and durability that Boss Air Suspension is known for. Experience the difference with the 25 ELBOW 3/8 MALE FEMALE and take your air suspension system to the next level.

View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 25 ELBOW 3/8 MALE FEMALE fitting? ⌄

The 25 ELBOW 3/8 MALE FEMALE fitting is designed to connect air lines in your air suspension system, allowing for efficient airflow and optimal performance. Its elbow shape helps navigate tight spaces within your setup.

Is the 25 ELBOW 3/8 MALE FEMALE suitable for all air suspension systems? ⌄

This fitting is specifically designed for use with Boss Air Suspension systems. While it may fit other systems with similar specifications, it is recommended to use Boss fittings for optimal compatibility and performance.

Can I use the 25 ELBOW 3/8 MALE FEMALE fitting with other brands' air fittings? ⌄

While the 25 ELBOW 3/8 MALE FEMALE fitting may physically connect with other brands, it is recommended to use Boss fittings for best results. Mixing brands can lead to compatibility issues and potential leaks.

What is the maximum working pressure for the 25 ELBOW 3/8 MALE FEMALE fitting? ⌄

The 25 ELBOW 3/8 MALE FEMALE fitting is designed to handle high pressures typical in air suspension systems. Always refer to the specific pressure ratings provided by Boss to ensure safe operation.

How should I install the 25 ELBOW 3/8 MALE FEMALE fitting? ⌄

To install the 25 ELBOW 3/8 MALE FEMALE fitting, ensure that all threads are clean and apply a liquid thread sealant for a secure fit. Tighten the fitting appropriately, ensuring it is not over-tightened to avoid damage.

What are the common applications for the 25 ELBOW 3/8 MALE FEMALE fitting? ⌄

The 25 ELBOW 3/8 MALE FEMALE fitting is commonly used in load assist kits for vehicles, trailers, and caravans. It helps facilitate smooth airflow, contributing to the stability and performance of air suspension systems.