Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

Yes, the 25 ELBOW 1/4 MALE FEMALE fitting is compatible with all Boss air fittings that use a 1/4 inch thread size. This ensures seamless integration within your existing air suspension setup.

This fitting is constructed from high-quality materials designed for durability and resistance to corrosion. This ensures a long-lasting connection that can withstand the pressures of an air suspension system.

While the 25 ELBOW 1/4 MALE FEMALE fitting is primarily designed for air suspension systems, it can also be used in other pneumatic applications that require a 1/4 inch male to female connection. Always ensure compatibility with your specific system.

The 25 ELBOW 1/4 MALE FEMALE fitting is rated for high pressure, suitable for use in air suspension systems. Always refer to the specifications provided by Boss Air Suspension for detailed pressure ratings to ensure safe operation.

To install the 25 ELBOW 1/4 MALE FEMALE fitting, ensure that the threads are clean and free of debris. Apply a suitable thread sealant, then screw the fitting into the designated port, tightening securely without over-torquing to avoid damage.