• 25 45 DEGREE 1/8 MALE FEMALE - Boss Air Suspension
1 1

Boss Air Suspension

45 Degree 1/8 Male/Female Fitting

45 Degree 1/8 Male/Female Fitting

COM-25-45Deg-1/8 MF

$9.55 AUD
$9.55 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

Low stock: 6 left

This 45 Degree 1/8 Male/Female Fitting helps angle a 1/8 threaded connection in compact air suspension and onboard air plumbing layouts.

  • 45 degree angled fitting
  • 1/8 male/female connection
  • Useful for tight component routing
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What applications is the 25 45 DEGREE 1/8 MALE FEMALE fitting suitable for? ⌄

The 25 45 DEGREE 1/8 MALE FEMALE fitting is ideal for applications where space is limited, making it perfect for tight installations in air suspension systems. It is commonly used in Load Assist kits to connect air lines between components efficiently.

How does the 45-degree angle benefit installation? ⌄

The 45-degree angle of this fitting allows for easier routing of air lines in confined spaces. This design helps to avoid kinks and bends in the airline, ensuring a smooth airflow and reducing the risk of leaks.

Is this fitting compatible with all air systems? ⌄

The 25 45 DEGREE 1/8 MALE FEMALE fitting is designed to be versatile and compatible with a wide range of air systems that utilise 1/8 inch fittings. However, always ensure that your specific air system uses the same size and type of fitting for optimal performance.

What materials are used in the construction of this fitting? ⌄

This fitting is constructed from high-quality materials to ensure durability and resistance to wear and tear. It is designed to withstand the pressures typically found in air suspension systems, providing a reliable connection for your setup.

Can this fitting be used in conjunction with other fittings? ⌄

Yes, the 25 45 DEGREE 1/8 MALE FEMALE fitting can be used alongside other 1/8 inch fittings. However, ensure that all connections are secure and compatible to prevent leaks and maintain system integrity.

What is the recommended installation procedure for this fitting? ⌄

To install the 25 45 DEGREE 1/8 MALE FEMALE fitting, ensure that all threaded connections are clean and free from debris. Apply a liquid thread sealant to the threads to prevent leaks, and tighten securely without over-torquing to avoid damage.