1/8 Hex Nipple

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 1/8 HEX NIPPLE is designed to create a secure connection between air lines in your air suspension system. It connects two 1/8" fittings, ensuring a reliable flow of air to and from your airbags.

Yes, the 1/8 HEX NIPPLE is compatible with all Boss air fittings that utilise 1/8" connections. This makes it a versatile choice for various applications within your air suspension setup.

The 1/8 HEX NIPPLE is constructed from high-quality materials designed for durability and resistance to wear. This ensures a long-lasting performance in your air suspension system.

Yes, the 1/8 HEX NIPPLE is designed to withstand high-pressure environments typical in air suspension systems. However, always ensure that the pressure ratings of your entire system are compatible.

To install the 1/8 HEX NIPPLE, simply thread it into the corresponding 1/8" fitting, ensuring a tight seal. It is recommended to use a liquid thread sealant to prevent leaks.

The 1/8 HEX NIPPLE is commonly used in air suspension systems for connecting air lines, as well as in various pneumatic applications where a secure connection is required.