• 1/4TUBE-1/4NPT T PIECE - Boss Air Suspension
1 1

Boss Air Suspension

1/4 Tube x 1/4 NPT Run Tee Male Fitting

1/4 Tube x 1/4 NPT Run Tee Male Fitting

FIT-PE1/4-1/4NPT-RT

$9.45 AUD
$9.45 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

144 in stock

This 1/4 tube x 1/4 NPT run tee male fitting creates a branch connection while adapting 1/4 airline to a 1/4 NPT male thread.

  • 1/4 airline run tee fitting
  • 1/4 NPT male threaded connection
  • Useful for adding a branch in air suspension and onboard air plumbing
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 1/4TUBE-1/4NPT T PIECE? ⌄

The 1/4TUBE-1/4NPT T PIECE is designed to connect various components within your air suspension system. It facilitates smooth airflow, ensuring optimal performance and reliability of your setup.

What materials are used in the construction of the T PIECE? ⌄

The 1/4TUBE-1/4NPT T PIECE is crafted from high-quality materials to ensure durability and reliability. Its robust construction is designed to withstand the pressures associated with air suspension systems.

Can I use the 1/4TUBE-1/4NPT T PIECE for other applications outside of air suspension? ⌄

While primarily designed for air suspension systems, the 1/4TUBE-1/4NPT T PIECE can be used in other pneumatic applications that require a similar fitting. Ensure that the pressure and flow requirements match your intended use.

What is the maximum working pressure for the 1/4TUBE-1/4NPT T PIECE? ⌄

The 1/4TUBE-1/4NPT T PIECE is designed to handle standard pressures found in air suspension systems. For specific pressure ratings, please refer to Boss Air Suspension's technical documentation or consult with a professional installer.

How should I install the 1/4TUBE-1/4NPT T PIECE? ⌄

Installation of the 1/4TUBE-1/4NPT T PIECE requires proper alignment and secure fitting. It is recommended to use a liquid thread sealant on threaded connections to prevent leaks. Ensure all connections are tight and check for any air leaks after installation.