• 1/4 X 1/8 REDUCING BUSH - Boss Air Suspension
1 1

Boss Air Suspension

1/4 X 1/8 REDUCING BUSH

1/4 X 1/8 REDUCING BUSH

COM-24REDBUSH-1/4X1/8

$6.60 AUD
$6.60 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

56 in stock

The 1/4 x 1/8 Reducing Bush adapts a 1/4 threaded connection down to 1/8 in air suspension and onboard air plumbing.

  • 1/4 x 1/8 reducing bush
  • Threaded adapter fitting
  • Useful for adapting between fitting sizes
  • Suitable for air suspension and onboard air systems
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 1/4 X 1/8 Reducing Bush? ⌄

The 1/4 X 1/8 Reducing Bush is designed to connect different sized air fittings within your air suspension system. It allows for seamless integration between components, ensuring optimal air flow and system performance.

What materials is the reducing bush made from? ⌄

This reducing bush is crafted from high-quality materials that ensure durability and resistance to wear and tear. Its robust construction is designed to withstand the pressures of air suspension systems.

Can the 1/4 X 1/8 Reducing Bush be used with any air suspension system? ⌄

While the reducing bush is versatile, it is specifically designed for use in Boss Air Suspension systems. Ensure compatibility with your existing fittings and air lines for optimal performance.

What are the typical applications for the 1/4 X 1/8 Reducing Bush? ⌄

This reducing bush is commonly used in Load Assist kits to connect air lines of different sizes, facilitating efficient air distribution to airbags. It's ideal for enhancing load handling capabilities in vehicles and trailers.

How does the 1/4 X 1/8 Reducing Bush differ from other fittings? ⌄

The 1/4 X 1/8 Reducing Bush features a specific size reduction that allows for a secure fit between different air line sizes. Unlike standard fittings, it is designed to maintain optimal air flow without compromising system integrity.

What pressure rating does the 1/4 X 1/8 Reducing Bush support? ⌄

The reducing bush is designed to handle the pressures typical in air suspension systems, ensuring reliable performance under load. Always check your system's specifications to ensure compatibility with pressure ratings.