1/4 TUBE 3/8THR ELBOW

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 1/4 TUBE 3/8THR ELBOW is designed to provide a secure and leak-free connection in your air suspension system. It facilitates optimal airflow and enhances the overall performance of the setup.

This elbow fitting is specifically designed to work with Boss Air Suspension systems. While it may fit other systems, it is recommended to use fittings that are specifically designed for your air suspension brand to ensure compatibility and performance.

While the 1/4 TUBE 3/8THR ELBOW is primarily designed for air suspension systems, it may be used in other pneumatic applications where a 1/4 inch tube and 3/8 inch thread connection is required. Always ensure that the fitting meets the specifications of your application.

This elbow fitting is commonly used in load assist kits, connecting airbag brackets to the air supply lines. It is ideal for enhancing vehicle stability and support when towing or carrying heavy loads.

The 1/4 TUBE 3/8THR ELBOW features a specific size and thread type that ensures compatibility with Boss Air Suspension systems. Its design focuses on providing a robust connection that prevents leaks, unlike some generic fittings that may not offer the same level of reliability.