1/4 Inch Push Connect Elbow Fitting

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 1/4 Push Connect Elbow is designed to create a reliable and efficient connection within your air suspension system. It allows for easy routing of air lines, ensuring that your setup remains functional and effective.

This fitting is specifically designed for use with Boss Air Suspension systems. While it can be used in various applications, it is best suited for setups that require a 1/4 inch connection for optimal performance.

The 1/4 Push Connect Elbow is made from high-quality materials that ensure durability and resistance to wear. This robust construction is essential for maintaining a reliable air connection in demanding environments.

While the 1/4 Push Connect Elbow is designed for Boss Air Suspension products, it may be compatible with other brands that use a standard 1/4 inch connection. However, for optimal performance and reliability, it is recommended to use Boss fittings with Boss systems.

Installation of the 1/4 Push Connect Elbow is straightforward. Simply push the air line into the fitting until it clicks into place. Ensure that the line is cut squarely for a proper seal. No additional tools are required for installation.

The 1/4 Push Connect Elbow is commonly used in load assist kits and air suspension systems for vehicles, trailers, and caravans. Its design allows for flexible routing of air lines, making it ideal for various setups.

If you experience a leak, first check that the air line is fully inserted into the fitting and that it is cut squarely. If the issue persists, inspect the fitting for damage or wear. It may be necessary to replace the elbow if it is compromised.