Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

The 1/4 BALL VALVE is designed to provide precise control over the airflow in your air suspension system. It allows you to easily shut off or regulate the air supply to the airbags, ensuring optimal performance and stability.

This valve is compatible with most air suspension systems, particularly those using Boss airbags. Its robust design makes it ideal for load assist kits, ensuring reliable operation under various conditions.

The 1/4 BALL VALVE is commonly used in load assist kits, allowing for easy adjustment of air pressure in airbags for improved vehicle stability when towing or carrying heavy loads. It can also be used in custom air suspension setups.

The 1/4 BALL VALVE is designed to handle pressures typical in air suspension systems. It is recommended to consult the product specifications for exact pressure ratings, ensuring it meets your system's requirements.

Installation of the 1/4 BALL VALVE should be done with care to ensure a secure fit. Use liquid thread sealant on threaded connections to prevent leaks, and ensure the valve is positioned for easy access for operation.