• 1/2 X 1/4 REDUCING BUSH - Boss Air Suspension
1 1

Boss Air Suspension

1/2 x 1/4 Reducing Bush

1/2 x 1/4 Reducing Bush

COM-24REDBUSH-1/2X1/4

$10.75 AUD
$10.75 AUD
Sale Sold out
Taxes included. Shipping calculated at checkout.

or up to 12 months interest free. Fees apply. ZIP

93 in stock

The 1/2 x 1/4 Reducing Bush helps adapt different fitting sizes in the same air suspension or onboard air setup by stepping a 1/2 connection down to 1/4.

  • 1/2 x 1/4 reducing bush
  • Useful for adapting mismatched connection sizes
  • Suitable for air suspension and onboard air systems
  • Sold as a single fitting
View full details

Frequently asked questions

Should I use thread tape or thread sealant on air fittings? ⌄

Boss recommends using a liquid thread sealant rather than thread tape. Small fragments of thread tape can break off, travel through the airlines and lodge in valves or valve blocks, causing them to stick open or closed. A quality thread sealant seals the threads without shedding debris.

How do I avoid leaks with push-to-connect fittings? ⌄

Always cut the airline square with a sharp tube cutter, not side cutters. Push the tube firmly into the fitting until it bottoms out, then pull back gently to seat the collet. Most leaks are caused by angled cuts, scratched tube, or the line not being fully inserted.

Can I reuse push-to-connect fittings and airlines? ⌄

You can often reuse fittings and lines if they are in good condition, but if the tube end is scratched, oval or has been repeatedly removed, it is safer to cut back to a fresh section or replace it. Damaged tube ends are a common source of slow leaks.

What is the purpose of the 1/2 X 1/4 Reducing Bush? ⌄

The 1/2 X 1/4 Reducing Bush is designed to create a seamless connection between different sized air fittings in your suspension system. It allows for the integration of components with varying diameters, ensuring optimal air flow and system efficiency.

What materials are used in the construction of the reducing bush? ⌄

This reducing bush is constructed from high-quality materials that ensure durability and resistance to wear. Its robust design is tailored for the demands of air suspension systems, providing reliable performance over time.

Can the 1/2 X 1/4 Reducing Bush be used with all Boss air suspension products? ⌄

While the 1/2 X 1/4 Reducing Bush is compatible with many Boss air suspension products, it is essential to confirm that it fits your specific setup. Always check the specifications of your components to ensure compatibility.

What are the typical applications for the 1/2 X 1/4 Reducing Bush? ⌄

This reducing bush is commonly used in Load Assist kits to connect air fittings of different sizes. It is ideal for both professional installations and DIY projects, enhancing the versatility of your air suspension system.

How does the 1/2 X 1/4 Reducing Bush differ from other fittings? ⌄

The 1/2 X 1/4 Reducing Bush specifically allows for a reduction in fitting size, which is not available in standard fittings. This feature is crucial for adapting various components in air suspension systems, ensuring a secure and efficient connection.

Is any special installation procedure required for the reducing bush? ⌄

No special installation procedure is required for the 1/2 X 1/4 Reducing Bush. However, it is recommended to use a liquid thread sealant on threaded fittings to prevent leaks and ensure a secure connection.