Airbag suspension kit for Nissan Navara: towing upgrade

Nissan Navara Airbag Suspension: Best Pick for 2026

A Nissan Navara NP300 sagging at the back under a caravan, boat or full tray of tools is one of the most common suspension complaints Boss Air Suspension hears from ute owners across Australia. A Nissan Navara airbag suspension kit corrects that sag, keeps the vehicle level under load and improves stability while towing, without touching the factory GVM rating.

TL;DR
  • The Boss Coil Assist Kit for Nissan Navara NP300 fits lifts up to 2 inches — Buy for regular towing and load-carrying use.
  • A working nissan navara airbag suspension setup needs a pressure controller to adjust load on the fly — Consider the PX06 kit.
  • Skip universal load assist kits not built for the Navara's specific rear geometry — fitment matters more than price.
  • Boss backs Navara airbag kits with a 5-year warranty and Australian-based technical support.
Key numbers
2 inch
Max lift kit compatibility
5 years
Warranty coverage

Why this matters

Rear-end sag on a loaded Navara isn't just a cosmetic issue. It lifts the headlights, unloads the front wheels and makes the vehicle wander under braking when towing. In 2026, with camper trailers and dual-axle caravans heavier than ever, a Navara running stock leaf springs alone often can't hold a level ride height once you add a loaded tow ball.

An airbag suspension kit works with the Navara's existing rear suspension, not instead of it. The airbags take up the extra load, helping the vehicle sit closer to its unladen height and improving handling while towing or carrying gear. It's a load assist system, not a GVM upgrade — nothing about it increases the vehicle's legal payload or towing capacity unless paired with an approved GVM upgrade.

Who this is for

This guide is for Nissan Navara NP300 4WD owners who regularly tow caravans, boats or trailers, or who carry canopies, tool boxes and touring gear that pushes the rear suspension toward its limit. If you're seeing headlight lift, a wallowy ride while towing, or the back end sitting noticeably lower than the front when loaded, a Coil Assist Kit for Nissan Navara NP300 4WD is the category of product built to address it.

What to look for in a Navara airbag suspension kit

Vehicle-specific fitment

A kit built for the Navara's rear suspension geometry bolts to factory mounting points and works with the existing spring setup. Generic "universal" airbag kits often need custom bracket fabrication, which adds cost and introduces fitment risk that a vehicle-specific kit avoids.

Lift height range

Check whether the kit is rated for standard height or a specific lift range. The Boss Coil Assist Kit for the Nissan Navara NP300 4WD is built for vehicles running up to a 2 inch lift — running it outside that range risks poor airbag geometry and uneven wear.

Bellow configuration and load range

Double bellow airbags suit lighter, more frequent loads like tools and camping gear. Triple bellow airbags handle heavier, sustained loads such as caravan tow ball weight. Matching the bellow type to your actual towing and carrying habits matters more than picking the highest-rated option available.

Pressure control method

You'll adjust air pressure depending on whether you're empty, loaded or towing. A basic valve and gauge setup works, but a pressure controller kit with the PX06 compressor lets you inflate or deflate from inside the cab, which is far more practical on the road. Getting the right PSI for load assist airbags makes a bigger difference to ride quality than most owners expect.

Installation and bracket quality

A bolt-on kit with pre-drilled brackets installs in a home garage with basic tools. Kits requiring welding or drilling into the chassis add time and risk if you're not experienced with suspension work.

Warranty and local support

Air suspension parts see constant flex and road grime. A 5-year warranty backed by an Australian supplier means support is available without shipping parts overseas if something needs checking.

Top picks for the Nissan Navara NP300

Boss Coil Assist Kit for Nissan Navara NP300 4WD (up to 2 inch lift) — the standard pick. This is the only Navara-specific airbag kit in the Boss range, built for vehicles running factory height up to a 2 inch lift. It's rated for regular towing and load-carrying duty and comes with mounting brackets and fittings for a bolt-on install. Buy for most Navara owners towing caravans or carrying tools.

Boss Auto Pressure Controller Kit with PX06 compressor — the pick for drivers who adjust load often. It pairs a 9 litre tank with a 12V compressor and in-cab controls, so you can change airbag pressure between an empty run and a full tow without crawling under the vehicle. Consider if you switch between loaded and unloaded driving weekly.

Digital Airbag Inflation Kit (PX01, 3-button) — the simpler in-cab option. It gives you push-button inflate and deflate control without the full tank-and-compressor setup, which suits owners who mainly need quick adjustments rather than constant pressure monitoring. Consider for lighter, occasional towing.

Airbag Fitting Kit — the accessory most owners forget. It covers the air line, fittings and valves needed to complete a DIY install cleanly, and it's worth having on hand even with a complete kit in case a fitting needs replacing down the track. Consider as a companion purchase, not a standalone fix.

What to avoid

  • Universal airbag kits with no Navara-specific bracket set. They may fit physically but often sit at the wrong angle under load, which shortens bellow life and reduces the benefit you're paying for.
  • Kits rated for a lift height your Navara doesn't have. Running a kit built for a 2 inch-plus lift on a standard-height Navara changes the airbag's working angle and can cause premature wear.
  • Skipping pressure adjustment altogether. An airbag kit set-and-forget at one pressure for both empty and loaded driving defeats the purpose — testing and adjusting airbag suspension pressure for each load is part of getting the ride quality right.

Verdict comparison

Product Best for Install Verdict
Coil Assist Kit (Navara NP300, up to 2" lift) Regular towing and load carrying Bolt-on, home garage Buy
Pressure Controller Kit with PX06 Frequent load changes Bolt-on with wiring Consider
Digital Inflation Kit PX01 3-button Occasional towing Simple in-cab fit Consider
Airbag Fitting Kit DIY completion parts N/A Consider

FAQ

What's the best airbag suspension kit for a Nissan Navara NP300?

The Boss Coil Assist Kit for Nissan Navara NP300 4WD is the vehicle-specific option, built for models running up to a 2 inch lift. It's designed for regular towing and load-carrying use and installs as a bolt-on kit.

Does an airbag suspension kit increase my Navara's towing capacity?

No. A load assist airbag kit improves ride height, stability and comfort under load, but it does not increase the vehicle's legal payload, GVM or towing capacity. Any capacity change requires an approved GVM upgrade.

How much air pressure should I run in a Navara airbag kit?

Pressure depends on the load, typically starting low when unladen and increasing as you add weight or hook up a trailer. Checking the right PSI for your specific load each time you tow gives the most consistent ride.

Can I install a Navara airbag suspension kit myself?

Most Boss kits are designed as bolt-on installs using factory mounting points, which suits an experienced home mechanic with basic tools. If you're unsure about bracket placement or air line routing, a workshop install removes the guesswork.

Is a Nissan Navara airbag suspension kit worth it for occasional towing?

If you tow a few times a year with a lighter trailer, a simpler in-cab digital inflation kit may suit better than a full compressor and tank setup. Frequent towing or heavier loads justify the added convenience of a pressure controller kit.

What warranty comes with a Boss airbag suspension kit?

Boss Air Suspension backs its load assist and coil assist kits with a 5-year warranty, supported by an Australian-based team for technical questions after purchase.

Will an airbag kit fit a Navara with an existing suspension lift?

It depends on the lift height. The Navara-specific Coil Assist Kit is rated for vehicles at standard height up to a 2 inch lift — anything beyond that range needs a different kit rated for the higher lift.

One last thing

The detail most Navara owners miss isn't the kit itself — it's the pressure. An airbag suspension kit left at one static pressure for both the daily commute and a loaded tow run gives up most of the comfort and stability benefit it's designed to deliver. Adjusting pressure to match the load, every time, is what separates a kit that just sits there from one that actually earns its place under a Navara.

Related guides

Back to blog